|

DIY Industrial style message board

Looking to organize the whole family? This DIY Industrial style message board is a breeze to make, customize plus it has all the command center must haves, in style!

Looking to organize the whole family? This DIY Industrial Style Message Board is a breeze to make, to customize PLUS it has all the command center must haves, in style! #commandcenter #commandstation #messageboard #diy #diycommandcenter #diycommandstation #diymessageboard #organization

Hi, I’m Amy from Home Remedies! I don’t know about you, but the start of a fresh, new year always makes me want to get organized. With a hubby and two busy kiddos, one of whom just started driving, it’s hard to keep up with who needs to go where, and when! Yes, we live in the age of smart phones, and they’re great for keeping track of appointments and checking in with each-other when we’re all on the go, but sometimes you just need a place to scribble a quick message, park those receipts, and corral the never-ending pile of mail. I looked high and low for a “message center” that would fit my family’s needs while still fitting in with the rest of my home decor, but couldn’t seem to find anything I liked, so I decided to make one.

DIY Industrial Style Message Board

Love this industrial message board. Such a great way to get organized in one spot! Love this industrial style command center! #diy #organization #organizationhack #diycommandcenter #commandstation #messageboard

Supplies to Make an Industrial Message Board

  • 1 Piece of plywood – mine was a 2′ x 4′ x 1/2″ thick piece of plywood, pre-sanded on one side. It was cut down to 3′ long for this project.
  • Measuring tape
  • Cordless drill
  • 150 (medium) grit sandpaper
  • Painters tape
  • Rags for staining
  • Paint brush or small roller
  • 1 Side-load letter tray
  • 2 Bulldog clips
  • Screws (8 x 1/2 / M4.2 x 12.7 Truss washer lath screws)
  • 4   3/16″ Midget one hole straps
  • 2 small D-ring hangers
  • 3  1 /4″ cup hooks
  • 4  3″ flat corner braces
  • Rust-oleum 2x Ultra paint + primer in Satin Granite
  • Minwax wood stain in “Provincial”
  • Rust-oleum wood stain in “Driftwood”
  • Black chalkboard paint

Check out More Organization Ideas

How to Make an Industrial Message Board

  • Cut your wood to the desired size and lightly sand the edges.
  • Wipe off any dust.
  • Rough place your items on the board, for a good visual of item placement.
  • Tape off the area that will become the chalkboard. I measured 2″ from the left, top and bottom edges, making my chalkboard area 17 1/4″ w x 19 3/4″h.
  • Stain the wood using Provincial, avoiding the taped off chalkboard area. Don’t forget to stain the edges of the board!
  • While the stain dries, spray paint the bulldog clips, screws, and hole straps using the gray spray paint. Then, using black chalkboard paint, lightly distress the painted pieces. Once dry, lightly sand for an aged, distressed look.
  • Apply the Rust-oleum, Driftwood stain. The key to getting this look is to apply the Driftwood stain lightly, working in small areas, then wiping off immediately. If some areas end up looking too gray, go back over them with Provincial using the same technique (apply lightly, work in small areas), until you get the desired look.
  • Once the stain is dry, remove painters tape, tape off outside area of chalkboard, and apply 2-3 coats of chalkboard paint inside the taped off area, letting each coat dry completely before applying the next coat.
  • Once all the paint and stain is dry, turn the board over and screw in the hangers.

Supplies to make an industrial message board to keep the family organized. Such a pretty command station! #messageboard #commandcenter #commandstation #diy #homedecor #organization

  • Turn the board back over and place the basket centered between the right edge of the board and the left edge of the chalkboard (1 1/2″ from each edge, 3 5/8″ from the bottom edge). Secure the basket using 4 of the one hole straps.
  • Measure 2 1/2″ down from top edge of the board and screw in the bulldog clips, 7 1/2″ apart from each other.

How to make an industrial message board using wood and a wire basket with easy to find hardware. Love this farmhouse command center, so cute! #messageboard #commandcenter #commandstation #diy #organization

  • Place the corner braces around the edges of the chalkboard and screw into place.
  • Measure, then screw in the cup hooks (1 3/4″ from the bottom edge, 3 3/4″ apart from each other).

How to make a message board, this is so cute! Love this industrial style command station, great way to organize the whole family. #commandcenter #diy #commandstation #messageboard #industrialstyle #farmhouse #organization

Thanks so much for letting me share this project with you today! I’d love it if you would follow me over at Home Remedies where I share quick and easy DIY and Home Decor Projects. You can also connect with me here: Facebook | Instagram | Pinterest | Twitter | Blog

Love this industrial message board. Such a great way to get organized in one spot! Love this industrial style command center! #diy #organization #organizationhack #diycommandcenter #commandstation #messageboard

Please PIN so your friend’s can make one too!

Image result for industrial style message board lolly jane

Similar Posts

11 Comments

  1. Oh I love this idea and the tutorial is so easily understood. I can totally see this working for me. Thanks Amy!

  2. I love this idea! I am totally in the market for a organization board like this! I haven’t been able to find the look that I want until now. Thanks for sharing!
    ~Carrie

Leave a Reply

Your email address will not be published. Required fields are marked *